DANA Thermal Transfer Overprinter
description1
description2
Description
We prioritize reducing the Total Cost of Ownership (TCO) in the design of our thermal transfer coders. Coupled with original carbon ribbons, we ensure optimal printing quality and lower usage costs.
Advantages
Cost Savings
1.The 20mm to 50mm ultra-wide ribbon range optimizes ribbon usage.
2.Includes Format Designer software with automatic ribbon optimization features.
3.Patented ribbon saving function helps reduce ribbon waste.
4.A low-cost 32mm print head option is available for use with ribbons narrower than 35mm.
Optimized Operation
1.Real-time monitoring of utilization rates, ribbon status, and defect detection.
2.The standard 1100-meter ribbon length allows for longer operating times.
3.Smart data input features make work management more convenient and accurate.
4.Format Designer easy-to-use information design software.
High Reliability
1.Cost-effective print head warranty service
2.Robust and reliable construction: no vulnerable parts are used in the ribbon cassette design.
3.High time availability factor
4.Optional IP protection for harsh environmental conditions and high-pressure water washing.
Environment-Friendly
1.Printing at a pressure of 2.5 bar, the air consumption per print is as low as 0.4ml,
and power consumption is reduced by 50%.
2.The new standard ribbon design reduces
ribbon waste by 20%.
3.The energy-saving function within the
controller improves energy efficiency.
High-Efficiency Printing
1.Introducing the smart print head with automatic settings and defect detection features,
2.Each package can have a unique code,
3.Printing speed up to 600mm/s,
4.High resolution of 300dpi.
Samples
Technical Parameters
DANA Thermal Transfer Overprinter(TTO) | |
Item |
Specifications |
Structure |
All-metal structure |
Printing mode |
Thermal transfer printing |
Maximum print width |
53/32mm(dPi) |
Print area |
53/32mm*75mm(intermittent) 53/32mm*100mm(continuous) |
Resolution |
300dPi(12 dots/mm) |
Printing speed |
40-600mm/s |
Processor |
32-bit RSIC processor |
Memory |
Minimum 8MB |
Dynamic memory |
Minimum 16MB |
Real-time clock function |
STD battery discharge life at least 3 years |
Detector |
Ribbon tension detection, thermal head position detection, cover open detection, thermal head overheat detection, ribbon breakage detection |
Flexible packaging detection |
Electromagnetic induction or synchronizer |
Types of flexible packaging materials |
PVDC、PET、PE、NY、CPP、OPP、BOPP、BOPA、CPP、PE、VMPET、VMCPPand other films and composite films |
Ribbon capacity |
Maximum length 1100 meters of 1'' core axis |
Types of ribbon |
Type: Mixed base/resin Width: 20MM(0.79’’) to 55MM(2.17’’) |
Ribbon saving |
Supports staggered, radial, multiple printing signals, digital ribbon saving print, ribbon backfeed and other ribbon saving modes. The minimum ribbon interval between two lines of print is not more than 0.5mm |
Air pressure supply |
Maximum 6bar\90psi |
Air consumption |
As low as 4ml/print at 2.5 bar |
Print concentration levels |
31levels |
USB interface |
STD 1 port, Type B connector, USB device 2.0 |
USB host interface |
STD 1 USB disk connection port, USB host 2.0, automatic detection and setting upon connection |
Serial port |
STD 1 port, female D-SUB 9-pin connector default 9600,8/N/1, baud rate and format variable |
Ethernet interface |
STD 1 end, RJ-45 connector, IEEE802.3 10/100BASE-T |
Hardware interface |
Input: "Print start" and 1 configurable input Output: Fault, warning and 2 configurable outputs |
Power supply |
Internal switch power supply module, I/P: AC90V-264V, 47/63HZ; 150VA |
Software |
HPRT format editor |
Certification |
CCC |
Environmental conditions |
Operation: 0 to 40°C @ humidity 10% to 90% non-condensing Storage: -40 to 60°C @ humidity 10% to 90% non-condensing |
Machine size |
Printing unit: height less than 190mm, width less than 220mm, depth less than 236mm Controller: height less than 170mm, width less than 263mm, depth less than 190mm |
Machine weight |
Printing unit: less than 8kg Controller: less than 5kg |
Warranty |
Printing unit: 3 years Bracket and rubber roller Thermal head: 6 months or 50KM |
Reliability and lifespan |
Thermal head life cycle: 100KM Rubber roller life cycle: 1000KM PCBA:30000H |
